Description

–After installing the headset to the helmet, with the help of wireless technology, it can answer calls, control the state of playing music, etc..
–Frequency range: 2.402GHz~2.480GHz
–BT distance: 20~30m
–Lithium battery capacity: 3.7V/450mAh.
–Charging time: about 2 hours, Standby time: about 360 hours.
Description:
Name: Wireless Headset
The first step of manual pairing for the first time: in the power-off state, press and hold the power button for 3 seconds, the boot voice prompts "boot" and the red and blue lights flash alternately to enter.
BT pairing status Step 2: Turn on the mobile phone BT, select the BT name "YZ06" and click to connect. When the connection is successful, the indicator turns blue and flashes slowly, and there is a voice prompt "connected".
BT version: 5.0
Frequency range: 2.402GHz~2.480GHz
BT distance: 20~30m
Lithium battery capacity: 3.7V/450mAh
Charging voltage: 5V
Charging time: about 2 hours
Standby time: about 360 hours
FM radio function, press the power button to enter/exit the FM radio mode after power on (voice prompts "FM radio" when entering the FM radio mode), and press and hold the function key for 5 seconds to search and save radio stations.
Start the voice assistant: long press the function key for 3 seconds to activate Siri, and automatically exit after a few seconds without speaking.
Chinese and English voice switching: the initial voice prompt language is English. When the BT is turned on and not connected, double-click the power button, and hear the prompt tone of "beep…beep…beep…beep…", the language switch is successful.
Connect the walkie-talkie to use: insert the walkie-talkie into the walkie-talkie, the input interface (3.5mm audio port) on the headset host, then the headset can be used as an external headset for the walkie-talkie.
Auto connect after pairing: If the BT of the last paired phone was active, it will connect automatically.
When the headset is turned on again. If the headset is disconnected from the phone during normal connection and use.
The phone is out of the valid distance (voice prompt "disconnected"), when they enter the valid distance, they will automatically reconnect.
Automatic search: Once the paired mobile phone BT is turned off or disabled, the headset will automatically enter the pairing state, waiting for pairing.
Connect two mobile phones: After the first mobile phone is successfully connected, turn off the BT function. After the second mobile phone is successfully connected, turn on the BT function, and the first mobile phone is connected to the two mobile phones again.
Packing list:
1 x wireless headset
1 x horn Kit
1 x headset clip
1 x type-C charging cable
1 x magic tape
1 x user manual
1 x packing box
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don’t mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.