Description

–After installing the headset to the helmet, with the help of wireless technology, it can answer calls, control the state of playing music, etc..
–Frequency range: 2.402GHz~2.480GHz.
–BT distance: 20~30m (varies by mobile phone).
–Lithium battery capacity: 3.7V/500mAh.
–Charging time: about 2 hours; Standby time: about 360 hours.
Description:
Name: Wireless Headset
BT version: 5.0
Frequency range: 2.402GHz~2.480GHz
BT distance: 20~30m (varies by mobile phone)
Lithium battery capacity: 3.7V/500mAh
Charging voltage: 5V
Charging time: about 2 hours
Standby time: about 360 hours
Manual pairing for the first time: The first step is in the off state, long press the power button for 3 seconds, the boot voice prompts "boot" and the red and blue lights flash alternately to enter.
BT pairing status: The second step is to open the mobile phone BT, select the BT name "M7" and click to connect, the connection success indicator is off, and there is a voice prompt "connected".
FM radio function: After power on, press the power button to enter/exit the FM radio mode (voice prompts "FM radio" when entering the FM radio mode), and press and hold the pause button for 5 seconds to search and save radio stations. Click the pause button to mute/unmute, click the "+" button to switch the station up, and then click the "-" button to switch the station.
Start the voice assistant: press and hold the pause button for 2 seconds to activate Siri, and automatically exit after a few seconds without speaking.
Chinese and English voice switching: the initial voice prompt language is English. When the BT is turned on and not connected, double-click the power button, and hear the prompt tone of "beep…beep…beep…beep…", the language switch is successful.
Auto connect after pairing: If the BT of the last paired phone was active, it will connect automatically
When the headset is turned on again. If the headset is disconnected from the phone during normal connection and use
The phone is out of the valid distance (voice prompt "disconnected"), when they enter the valid distance, they will automatically reconnect.
Automatic search: Once the paired mobile phone BT is turned off or disabled, the headset will automatically enter the pairing state, waiting for pairing.
Connect two mobile phones: After the first mobile phone is successfully connected, turn off the BT function. After the second mobile phone is successfully connected, turn on the BT function, and the first mobile phone will connect the two mobile phones again.
Packing list:
1 x wireless headset
1 x horn Kit
1 x headset clip
1 x type-C charging cable
1 x magic buckle
1 x user manual
1 x packing box
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don’t mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.